Skip to content
  • There are no suggestions because the search field is empty.

[amaran Halo 60x & 100x] Safety & Certifications

Important safety instructions and certification information for the amaran Halo 60x and Halo 100x.

Read all instructions before using the amaran Halo 60x or amaran Halo 100x. These fixtures are intended for professional use only. Keep this information for reference.

Important Safety Instructions

When using the amaran Halo 60x and amaran Halo 100x, basic safety precautions should always be followed, including the following:

  1. Read and understand all instructions before using the fixture.
  2. Close supervision is necessary when any fixture is used by or near children. Do not leave the fixture unattended while in use.
  3. Care must be taken as burns can occur from touching hot surfaces.
  4. Do not operate the fixture if any power cable is damaged, or if the fixture has been dropped or damaged, until it has been examined by qualified service personnel.
  5. Position any power cables such that they will not be tripped over, pulled, or come into contact with hot surfaces.
  6. Always unplug the fixture from the power outlet before cleaning, servicing, or when not in use. Never pull on the power cord to unplug from the outlet.
  7. Allow the fixture to cool down completely before storing. Unplug all cables and store them properly. If a carrying case is used, place cables in their designated compartments.
  8. Do not immerse the fixture in water or any other liquid to avoid electric shock.
  9. Do not disassemble the fixture to avoid the risk of fire or electric shock. For service, contact cs@aputure.com or consult qualified service personnel. Improper reassembly may result in electric shock when the fixture is in use.
  10. Using any accessory not recommended by the manufacturer may increase the risk of fire, electric shock, or personal injury.
  11. Power this fixture only by connecting it to a properly grounded outlet.
  12. Do not block the ventilation openings. Do not look directly at the LED light source when it is powered on, and never touch the LED emitters under any condition.
  13. Do not place the fixture near flammable materials or volatile solvents, as this may cause damage.
  14. Use a soft, dry cloth to clean the device.
  15. When operating in humid or wet environments, ensure that all ports and plugs are completely dry to avoid short circuits or electric shock.
  16. If the external flexible cable or cord of this fixture is damaged, it must be replaced by a special cable or cord provided by the manufacturer or its service agent.
  17. The light source contained in this fixture shall only be replaced by the manufacturer, its service agent, or similarly qualified personnel.
  18. All repair and maintenance must be performed by authorized service personnel only. Any damage caused by unauthorized disassembly is not covered under warranty, and the user shall bear the related repair costs.
  19. The low-voltage power supply and DMX circuits are designed with reinforced insulation.
  20. This fixture is intended for professional use only. It is certified by RoHS, CE, KC, PSE, and FCC. Please operate the product in accordance with the applicable standards and regulations of your country or region.
  21. Malfunctions caused by improper operation are not covered under warranty, and repair costs shall be borne by the user. This user manual is based on thorough in-house testing. Product design and specifications are subject to change without prior notice.

Certifications

The amaran Halo 60x and amaran Halo 100x are certified by RoHS, CE, KC, PSE, and FCC, and additionally carry IC, UL, and CSA markings. Operate the product in accordance with the applicable standards and regulations of your country or region.

  • NOT FOR HOUSEHOLD USE / NON DESTINÉ À UN USAGE DOMESTIQUE
  • DISCONNECT POWER BEFORE SERVICING / COUPER L'ALIMENTATION AVANT L'ENTRETIEN

Related articles